Image description

Air Arms S510


A customer was having an issue with his Air Arms S510, the pellets were clipping the silencer which was attached to the shroud tube. This is a common issue with shrouded rifles and can ofted only be resolved by removing a portion of the shroud and by fitting a more secure silencer adaptor. The adaptor was fabricated from aluminium alloy and fitted direct to the barrel end, having porting within the adaptor means the shroud will still work as it should. the shroud length was reduced a few inches and the silencer now fits correctly centred to the barrel, with no clipping.

Image description
Image description
Image description


Logun Solo Multi-shot Custom

This Logun Solo has been stripped down to be converted from single shot to multishot, the action block was machined to take a 7 shot or 12 shot .22 magazine and the loading probe was machined too.

Before

Image description

During

Image description

After

Image description




Weihrauch HW97


This HW97K was sent for a custom tune, the compression tube was buttoned and ringed with delrin as was the piston. then a Titan spring was fitted with delrin guides before being fitted, the compression tube was also jewelled to add a little bling to an otherwise boring looking piece. the rifle shoots much better and gives a consistent 11.4 FPE over 60 shot with only 7FPS variance.

 

Image description
Image description
Image description
Image description